Ductile Iron Shoe Hose Pump System for Viscous and Abrasive Fluids
Release time:
2026-11-16
The ductile iron shoe hose pump system from Powerflo is a positive displacement hose pump in our ductile iron range. The page shows the PFR-32, the roller version with a 32 mm hose ID, and lists a maximum pressure of 8 bar, a maximum flow rate of 2250 lph and a maximum speed of 60 rpm. The pump is built for viscous and abrasive fluids that would wear a standard centrifugal pump, and the hose is the only wetted part that flexes during operation.
How a Hose Pump Moves the Fluid
A hose pump works by squeezing a flexible hose with rollers or shoes. The fluid stays inside the hose and never touches the rotor or the housing, so the pump can handle slurries, pastes and chemicals without a valve or a seal in the flow path. The PFR-32 uses a ductile iron rotor with cast aluminium rotor shoes, and the page lists ductile iron or stainless steel for the housing, rotor and shoes. That choice lets a buyer match the pump to the site: ductile iron for a rugged duty, stainless steel for a corrosive one.
The hose is the wear part. The page lists natural rubber, food grade natural rubber, nitrile Buna, EPDM, food grade nitrile Buna and Hypalon as hose options. Each compound suits a different fluid: natural rubber for general abrasive slurry, nitrile for oil-based products, EPDM for water and some chemicals, and Hypalon for aggressive chemicals. The buyer should send the fluid, the concentration and the temperature so the hose compound can be selected.
Performance and Limits
The PFR-32 has a hose ID of 32 mm. The maximum pressure is 8 bar, the maximum suction range is 9.5 m, and the flow rate is listed as 1600 lph, with a maximum of 2250 lph. The maximum speed is 60 rpm, and the temperature range is -20 to +95 degrees Celsius. The maximum solid diameter is 8 mm for soft solids and 5.3 mm for hard solids. The pump weight is 120 kg.
Those limits should be checked against the duty before the order. A flow rate at the top of the range is reached at the maximum speed, and the pressure falls as the hose wears. A solid that is close to the maximum diameter can bridge at the inlet, so the suction line should be short and straight. The page does not give a viscosity limit, so a sample or a viscosity value should be sent for confirmation.

Materials, Ports and Lubrication
The pump housing is ductile iron or stainless steel with a grey or black powder coating. The front cover is steel or stainless steel, the window is acrylic, the rotor is ductile iron or stainless steel, and the rotor shoes are cast aluminium or stainless steel. The mounting frame is steel or stainless steel. The port flange is 316 stainless steel, with tri-clamp, NPT or BSP thread, and the insert can be polypropylene, PVDF or titanium alloy. Hygienic connections include DIN11851 and DIN32676.
The lubricant is also part of the specification. The page lists Powerflolube, a glycerine-based lubricant, and Powerflosil, a silicone-based lubricant. The lubricant reduces friction between the hose and the housing and helps carry heat away from the hose. The buyer should use the lubricant recommended for the hose compound, because a silicone lubricant may not suit a natural rubber hose in the same way as a glycerine one.
Installation and Maintenance
A hose pump should be installed with a short suction line and a pulsation damper on the discharge if the pipe run is long. The hose should be checked for wall thinning, and the lubricant level should be topped up. The page does not give a hose change interval, so the site should record the running hours and inspect the hose at a fixed interval.
Selection and Ordering
To select a ductile iron shoe hose pump system, send the fluid, the viscosity, the temperature, the solid size, the required flow, the discharge pressure, the suction lift and the available voltage. If the line needs a hygienic connection, state the standard and the flange size. If the fluid is flammable or food grade, state that as well, because it changes the hose compound and the documentation.
Powerflo can be reached by email at sales@power-flo.com or by telephone at +86 18016316808. The page lists the model, the hose ID and the performance figures, but not the motor power or the exact flange dimensions for each option, so those points should be confirmed on the data sheet. Send the duty point with the inquiry and we will confirm the model, the hose and the ports before a quotation is issued.
Related News
Key Features to Look For in a Viscous Slurry Hose Pump
2026-11-16
Optimizing Mining Slurry Pump Hose Systems for Efficient Processing Plants
2026-11-13
Exploring the Advantages of Ductile Iron Slurry Hose Pumps in the Mining Industry
2026-11-10
Understanding Shoe Type Hose Pump Systems for Efficient Slurry Handling
2026-10-19
How Roller Hose Pumps Revolutionize Slurry Transfer Processes
2026-10-16
Get In Touch
If you have any suggestions, please leave a message or send an email to us
Phone Number/Whatsapp
Address: NO.126 Building, Zhutang Road, Hanjiang District, Yangzhou City, Jiangsu Province, China
Mobile Website